HP LaserJet Managed MFP E72530 Bedienungsanleitung Seite 31

2. Pull out the tray extension to support the paper.
3. Use the adjustment latch to spread the paper
guides to the correct size, and then load paper in
the tray.
Make sure that the paper fits under the fill line on
the paper guides.
NOTE: The maximum stack height is 10 mm
(0.4 in), or approximately 100 sheets of 75 g/m
(20 lb) paper.
4. Using the adjustment latch, adjust the side guides
so that they lightly touch the paper stack, but do
not bend it.
ENWW
2
Load paper 25