Parker Parflange 1050 Betriebsanleitung Seite 48

Parflange 1050
Greasing the main spindle Bearings
cartridge
Replacing the cartridge:
• Oben the side plate of the housing
• Open the flap of the integrated tool lubrication
• Pull out the plug of the lubricant dispenser
• Screw off the lid of the drive system
• Remove the drive system from the cartridge
• Screw the screw fitting from the cartridge
• Screw the screw fitting onto the new cartridge
• Screw on the lid with the drive system
• Insert the plug
LED Signal
Green Permanent signal
Red Permanent signal < 30sec. with
running motor
Red Permanent signal > 30 sec.
Green and red Permanent signal
drive system
LED function indicator
47
lid
Explanation
OK – system is working
Dispensing process
Error / interference
LC unit empty, please replace
plug