Indicator Lights - Klarstein 10028310 Handbuch

Programme Option buttons
Depending on the programme, different functions can be combined. These must be selected after
choosing the desired programme and before depressing the StarUPause button. When these buttons
are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights
go out.
• Select the Buzzer: After turning on the appliance, the buzzer is off if you do none operation.
The buzzer can be turned on or be turned off during the process. By pressing „Buzzer" button, the
buzzer goes off and the corresponding pilot light comes on. When the buzzer is on , the signal will
sound in the following cases: When depressing any buttob and at the end of the programme. When
the buzzer is on, if you press the „buzzer" button once more, the buzzer will be switched off.
• Select the Quick button: The option can be selected in the following programme: „Heavy", „Strong",
„Standard cotton".By depressing this button the drying time will be reduced by 3-5 minutes. The
corresponding light illuminates. This option cannot be selected together with „Delicate" option.
• Select Delicate: The option can be selected in the following sections: „Cottons", „Synthetics".
Pressing this button allows drying to be performed at a lower temperature, for delicate items, the
corresponding pilot light comes on.This function cannot be used with QUICK DRYING.
• Select Delay start: This button allows you to delay the starting of the programme by 12 hours
max. Delay Start. This option must be selected after having selected the programme and before
pressing Start/Pause to start the programme. Every time the button is pressed, the time is in-
creased by 1 hour. lt can be selected in both cases before and after selecting option programme
(Buzzer,Quick,Delicate). The countdown begins after you have pressed the StarUPause button and
the corresponding light illuminates. The display shows the remaining time. The remaining time is
dispalyed hour by hour.
Display
• After you have selected the programme, its duration (in hours and minutes) appears on the dis-
play. lt is calculated automatically on the basis of the maximum load accepted for each type of
fabric and of the required degree of drying. When the programme starts, the remaining time is
displayed every 1 minutes.
• Delayed Start: If you have selected a delay time by means of the relevant button,the display
shows it. The countdown is displayed hour by hour.Once you press the „Start/Pause" button, the
appliance will start the delayed process.
• Incorrect option selection: If you select an option that is not compatible with the programme
you have selected, the display shows ErS (error). This code will reappear during the execution of
the programme if you press one of the option buttons or turn the programme selsector.
Select the Start/Pause
Press this button to start the dryer after having selected the programme and the options. If the door
of the appliance is opened while the programme is running, this button must be pressed again after
closing the door in order to restart the programme from the point at which it was interrupted. In this
case the lights flash to remind you that the start button needs to be pressed again.

Indicator lights

• Drying: This light indicates that the appliance is in the drying phase.
• Cooling: This light indicates that the appliance is in the cooling phase. At the end of drying, there
is a 5 or 1 0 minutes cooling phase to cool the laundry.
• End: This light is on at the end of the cooling phase, during the anti-creasing phase.
• Filter: lt comes on every cycle to remind you that the filter must be cleaned and at the end of the
programme.
16