Child Lock - Haier HWD90-BP14636 Bedienungsanleitung

3- Control panel
3-6
5+5 kg
Intense Delay
Speed up
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
3-7
Start/Pause
3-8.1
Temp.
Speed
3-8.2
12
3.6- "Delay" button
Press this button (Fig. 3-6) to start the programme
with a delay. End time delay could be increased in steps
6:30 means end of programme cycle will be in 6 hours
and 30 minutes. Press "Start/Pause" button to activate
the time delay. It is not applicable to programme SPIN.
Start/Pause
3.7- "Start/Pause" button
Press this button (Fig. 3-7) gently to start or inter-
rupt the currently displayed programme. During pro-
gramme setting and during programme run the LED
above the button is shining, or if interrupted blinking. .

3.8 Child lock

5+5 kg
Intense Zeitvorwahl
Press button " Temp." and "Intense" for 3 seconds si -
multaneously (Fig. 3-8.1) to block all panel elements
against activation. For unlocking please press again
Speed up
the two buttons.
The display shows cLo
pressed, when the child lock is activated. The change
is not running.
Start/Pause
(Fig. 3-8.2) if a button will be
I -
EN