Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before First Use
l Remove the appliance from the packaging.
l Do not leave the packaging (plastic bags, polystyrene, etc.) within reach of babies or children.
l
After transportation at low temperatures, the appliance should be left in the room for 2 hours to
acclimatise before it is used.
l Do not put anything in the water tank other than clean water.
Description
Operating
You can change the mist output setting using the control knob. The button on the back of the
appliance turns the mist and light ON/OFF.
Place the appliance on a level and firm surface.
l Do not operate the appliance without water.
l To fill the tank, remove the mist nozzle to access the easy-carry handle.
l Remove the water tank from the base and unscrew the lid from the fill hole on the bottom of the
water tank.
l Fill the water tank with distilled water and be sure to properly reinstall the lid. Make sure the tank
lid has the silicon ring on it to ensure that there is no leakage.
l Replace the mist nozzle.
l Plug in the appliance and switch on using the button on the back. You can change the mist output
setting by turning the front control knob.
l If there is not enough water in the water tank, the indicator light will glow red and the appliance
will stop working. Unplug the appliance and refill the water tank.
Note: If moisture collects around the appliance, this is not a defect. It may be an indication that
the room humidity is too high. Reduce the mist output tsetting or switch off the appliance.
l It is normal to hear a dripping sound when the mist output setting is high.
l If the unit won't be used for an extended period of time, unplug it from the power-supply socket.
Nozzles
Water tank
Indicator light
Control knob
Base
ON / OFF
Werbung
