Connecting External Devices Through The Aux-In Socket; Troubleshooting; Cleaning And Care - Telefunken BS1011 Bedienungsanleitung

Buttons
(3)
The speaker has a built-in microphone (6), to ensure a good audio quality of your phone call, stay
„
in vicinity of the microphone when speaking.
5.2

Connecting external devices through the Aux-in socket

External appliances e.g. MP3 player or similar, can be connected via the 3.5mm audio cable (not
„
supplied) through Aux-in (2) of the appliance.
Switch on the appliance first (
„
Connect one end of the 3.5mm audio cable (not supplied) to the Aux-in (2) of the appliance.
„
A sound signal tone will be heard after insert and LED indicator (8) will light up blue continuously.
„
Connect the other end of the 3.5mm audio cable to the external appliances.
„
Note:
The volume of the appliance may be affected by the settings of the connected source. If
„
necessary, adjust the settings of the source device to improve the audio output.
When the audio cable is inserted, it will change to AUX IN mode automatically. The connection of
„
the Bluetooth device (if existing) will be interrupted.
Use the controls of the connected external device to regulate the playback.
„
6.

TROUBLESHOOTING

Problem
The device is not working.
No sound
Poor sound quality.
The battery isn't charged.
7.

Cleaning and care

Warning!
This appliance contains a built-in rechargeable battery. The housing must not be opened and the
battery must not be removed!
Warning!
The appliance contains electrical components. Never clean under running water! Make sure that
no liquids enter the interior of the appliance.
Clean the exterior with a lightly damp cloth.
„
Do not use petrol, alcohol or other abrasive cleansers to clean the exterior.
„
Do not allow liquids to spill into any openings.
„
Use the original packaging if it is necessary to transport the unit.
„
Function
To answer the phone call during playback:
Press 1x: To answer the phone call.
Press 2x: To end the phone call & will resume to play music.
4.1).
Possible cause
The battery is empty
The volume is set too low.
If there is an existing connection
via the 3.5mm Aux-in
socket (2), the settings on the
source device are not correct.
Poor Bluetooth reception
The micro USB charging
cable (9) isn't connected
correctly.
6
Solution
Charge the device with the USB
charging cable provided (charging the
battery).
Set the volume higher.
Make sure that the volume settings
on the source device are correct
and that playback is activated.
Shorten the distance between the
Bluetooth device and the appliance
and make sure that no obstacles
are preventing reception.
Make sure that the plugs on both
ends of the cable are connected
correctly and are fully inserted into
the respective connections.