Configuration (Setup Menu); Navigation In The Setup Menu; Parameter Settings (Overview) - Acculab VICON Betriebsanleitung

Configuration (Setup Menu)

To configure the balance; i.e., adapt the balance to individual requirements.
Step
1. Switch off the balance
2. Switch on the balance and
while all segments are displayed

Navigation in the Setup Menu

Key Press briefly
(ENTER) Menu level: move to the right (cyclical)
(F)
Menu item: Scrolling
(ZERO)
Menu level: Move to the left

Parameter Settings (Overview)

Setup 1 Weighing
menu
5. and 6.
8. Additional
functions
9. Reset menu
Key (or instruction)
(ON/OFF)
(ON/OFF)
(ZERO) briefly
Press and hold
Confirm setting
–
Save settings and exit Setup
1.1. Adapt filter
1.2. Application filter
1.3. Stability range
1.5. Calib./adjust./linearization:
Function of the (CAL) key
1.6. Auto zero
1.7. 1st weight unit, or 2nd unit in
Toggle Weight Units app.
Only relevant with built-in data interface: see corresponding interface description
8.1. Block key functions
8.2. Automatic shut-off
9.1. Factory settings
Display
ο Factory setting √ User-defined setting
1.1.1 Very stable conditions
ο Stable conditions
1.1.2
1.1.3 Unstable conditions
1.1.4 Very unstable conditions
ο Final readout
1.2.1
1.2.2 Filling
1.3.1 1/4 digit
1.3.2 1/2 digit
1.3.3 1 digit
ο 2 digits
1.3.4
1.3.5 4 digits
ο Calibration/adjustment
1.5.1
1.5.2 Linearization: for service personnel only
1.5.3 Key blocked
ο On
1.6.1
1.6.2 Off
1.7.1 User-defined unit; see
to 1.7.23 "Toggling between Weight Units"
8.1.1 All keys blocked except (ON/OFF)
ο All keys unblocked
8.1.2
ο After 2 minutes
8.2.1
8.2.2 After 5 minutes
8.2.3 After 10 minutes
9.1.1 Restore
ο Do not restore
9.1.2
13