Configuring The Balance/Scale; Setting The Parameters (Menu Codes) - Acculab ALC Series Betriebsanleitung

Configuring the Balance/Scale

Setting the Parameters (Menu Codes)

You can configure your ALC balance to meet individual requirements by selecting from the parameters available in the menu.
Example: Adapt the balance/scale to unstable ambient conditions:
Menu code 1 1 4
Step
1. Turn off the balance/scale
2. Turn the balance/scale back on;
while all segments
are displayed:
$ To navigate within a menu
level; the last menu option is
followed by the first option
3. Select the 2nd menu level
4. Select the 3rd menu level
5. In Menu Level 3:
Select the desired option
6. Confirm new setting;
the "o" indicates the currently set
option
$ Select the next menu level
(here: change from the 3rd to the 1st level)
$ Set other menu codes, if desired
7. Store parameter settings
and exit operating menu
or
$ Exit operating menu without
storing changes
> Restart the application
18
Key (or instruction)
[ON/OFF]
[ON/OFF]
[ZERO] briefly
[ZERO]
repeatedly
[PRINT]
[PRINT]
[ZERO]
repeatedly
[PRINT]
for 2 sec.
[PRINT]
[PRINT], [ZERO]
[ZERO]
for 2 sec.
[ON/OFF]
Display
1.
2.
...
9.
1.
1. 1.
1. 1. 2 o
1. 1. 4
1. 1. 4 o
1.
0.0 g