Honeywell V5004TF Installationsanweisung Seite 2

V5004TF ACTUATOR – INSTALLATION INSTRUCTIONS
Fig. 1. Measuring differential pressure across valve
Provided that the differential pressure is higher than the start-
up pressure, the valve keeps flow constant at the set value.
4a. Manual Override of the M5004
If it is necessary to manually open the valve, proceed as
follows:
1. Remove the power supply from the motor.
2. Open the rubber cover on the top of the actuator and
insert the 6 mm Allen key.
3. Turn the key while continuing to push down the
"release" button located on the bottom of the actuator.
1
Fig. 2. Manual override M5004
MU1B-0655GE51 R0719A
2
4b. Valve-Actuator Assembly
Fig. 3. Valve-actuator assembly
2