JCM Technologies VERSUS-PROG Bedienungsanleitung Seite 9

4.1.3 WRITE CONFIG TO C. PANEL
Allows writing different configurations to the control panels
Choose the desired configuration setting with the cursor and press Intro. The configuration settings are recorded automatically
and a operation message operation will be displayed if the operation is successful
4.1.4. DELETE CONFIG
Allows eliminating any existing configurations from programmer intern memory
4.1.5 RESET TO DEFAULT VALUES
It allows configuring the control panel with the default values.
4.1.6 PARAMETRES LEVEL
The parameters are organized in two different levels, basic and advanced.
Allows selecting what parameters will be displayed in the programmer
4.2 INFO CONTROL PANEL VERSUS
It allows reading the control panel inputs, outputs and switches.
4.3 CONFIG.OTHER UNITS
It allows setting the control panels configurable with PROG-MAN.
4.4 PROGRAMMER CONFIG
It allows setting the programming software.
4.4.1 LANGUAGE
This allows for the required language to be selected . There are 3 languages vailable depending on the version
4.4.2 HOT KEYS
Allows assigning different functions to the hot keys. Select the key you want to configure using the navigation keys and the
slider to navigate and assign different options to the hot keys.
4.4.2 APPEARANCE
Allows adjusting the parameters and/or deactivate some of the programmer appearance parameters: LCD contrast, vibration,
sound, slider active, slider sensitivity and battery type.
4.4.3 BATTERY TYPE
Allows choosing if the programmer batteries are re-chargeable or not.
When a charge of the rechargeable batteries is required, the programmer recharges the batteries slowly. If you want
to load them quickly, remove the batteries and recharge them with an external charger.
Attention: Do not attempt to charge non-rechargeable batteries.
4.4.4 MODO SERVICIO
Transfers the programmer control to the PC for: updating firmware, change languages and manage configurations form the
PC
USE OF THE PROGRAMMER
Designed for the management of installations as per the general description. Not guaranteed for other uses.
The manufacturer reserves the right to modify equipment specifications without prior notice.
EU DECLARATION OF CONFORMITY
JCM TECHNOLOGIES hereby declares that the product VERSUS-PROG complies with the relevant fundamental
requirements of the RED Directive 2014/53/EU, as well as with the Machine Directive 2006/42/EC whenever its usage is
foreseen; and with the 2011/65/EU RoHS Directive.
See website www.jcm-tech.com/en/declarations
JCM TECHNOLOGIES, SA • BISBE MORGADES, 46 BAIXOS - 08500 VIC (BARCELONA) SPAIN
UM_3200259_VERSUS-PROG_Rev01_5ID Page 9/15