Operation - JCM Technologies VERSUS-PROG Bedienungsanleitung

3. MENU
MAIN
MENU
VERSUS panels Config
Info control panel VERSUS
Config.Other units
Programmer Config

4. OPERATION

4.1 VERSUS PANELS CONFIG
It allows configuring the new generation control panels.
4.1.1 EDIT: ALL PARAMETERS (INPUTS, OUTPUTS, ON-OFF, NUMERICAL, SWITCH AND OTHERS)
Allows reading and/or editing the applicable parameters to the control panel, which will be displayed on screen depending on
what control panel model the programmer is connected to.
To read or modify parameters, place the cursor over the desired field and enter pressing the key Intro.
You can view the currently configured value on top of the screen of the controller, the default value is placed on the centre and
the configuration options are at the bottom. Using the lateral movement arrow keys and vertical movement arrow keys
(slider)you can navigate through the settings. To confirm a setting, press the key Intro.
After changing any parameter from the control panel, a complete programming manoeuvre must be performed.
4.1.2 READ CONF. FROM C. PANEL
Allows reading and saving different configurations from the control panels
The display will show the names of the previously saved configuration settings.
If you want to save a new configuration file, select "add new one" and choose a name to using the arrow keys.
If you want to save the configuration settings on an existing file, select the file with the cursor and accept. Note that the
previous settings will be erased and only the new configuration will be saved.
UM_3200259_VERSUS-PROG_Rev01_5ID
Edit all parameters
Edit INPUTS
Edit OUTPUTS
Edit ON-OFF
Edit NUMERICAL
Edit SWITCH
Edit OTHER
Read conf. From C. Panel
Write Config to C. Panel
Delete Config.
RESET to default values
Parameters Level
Info inputs
Info outputs
Info switch
Language
HOT Keys
Appearance
Battery type
Service Mode
English
Spanish
German
LCD Contrast
Vibration
Sound
Slider active
Slider sensitivity
Page 8/15