Tecknet 2000DPI Handbuch Seite 4

USB Nano Receiver
The receiver can be removed and stored in the battery compartment
while not in use.
Take out the receiver
Intelligent Power Saving (IPS)
The mouse is equipped with Intelligent Power Saving (IPS) function.
• When the USB Nano receiver is disconnected or the PC is switched
off, the mouse will be switched off automatically for the purpose of
power-saving.
• When your mouse is not operated for 3 seconds, it will automatically
drop to the first level of IPS. To wake the mouse, click any button.
• When your mouse is not operated for 10 seconds, it will
automatically drop to the second level of IPS. To wake the mouse,
click any button.
• When your mouse is not operated for 8 minutes, it will automatically
drop to the third level of IPS, e.g. sleep model. To wake the mouse,
click any button.
DPI Switch
The mouse supports 2000DPI, 1500DPI and 1000DPI. To switch to
either setting, press the DPI button.
• The default setting is 1000DPI.
• Short press the DPI button on the top of the
mouse once to switch from 1000DPI to 1500DPI,
the scroll wheel LED will flash twice.
• Short press the DPI button on the top of the
mouse once again to switch from 1500DPI to
2000DPI, the scroll wheel LED will flash three
times.
• Short press the DPI button on the top of the
mouse once again to switch from 2000DPI to
1000DPI, the scroll wheel LED will flash once.
1
Store the receiver
3
2
DPI Switch