Cvs And Parameters - LGB 55024 Handbuch

Register Assignment
CV 1 Switch decoder address
Programming protection (input "77" to allow one-time programming of a
CV 2
single CV)
CV 3 Switch setting direction ("0": normal; "1": inverse)
Input „55" to reset loco address (CV 1 and CV 9) to "1" During read-out:
CV 7
software version
CV 8 HManufacturer code, read only
Switch decoder address Byte 2
CV 9 For addresses above 255, byte 1 is programmed in CV 1 and byte 2 in CV 9:
Address = CV 9 x 256 + CV 1 (Not for LGB MTS).
e.g.: CV 9 = 1; CV 1 = 32; adress = 256 + 32 = 288
No other functions can be programmed. For advanced
applications, we recommend the LGB 55025 MTS
Switch Decoder.
6
Range Default
0 - 255 1
77 —
0 - 1 0
123
0 - 7 0