RIDGID Gyro II Bedienungsanleitung Seite 2

Gyro II / GyroLight
Operating Instructions
WARNING!
instructions and the ac­
companying safety book­
let carefully before using this
equipment. If you are uncertain
about any aspect of using this tool,
contact your RIDGID distributor for
more information.
Failure to understand and follow all
instructions may result in electric
shock, fire, and/or serious personal
injury.
SAVE THESE INSTRUCTIONS!
If you are uncertain about any aspect of using this
equipment contact your RIDGID distributor.
RIDGID self-levelling lasers are high-precision
measuring instruments designed to allow horizontal
and vertical lines to be projected onto a surface to
aid in the alignment of equipment and materials. We
strongly recommend that it NOT be modified or used
for any other application other than that for which it
was intended.
Keep these instructions together with the RIDGID self-
levelling laser.
GB
Read these
Ridge Tool Company
Gyro II / GyroLight
Specifications:
Gyro II
Laser diode: Class II
Wavelength: 635 nm
Max power < 1 mW
output:
Power supply: 3 type AA-size
1.5 volt
batteries
DC 4.5 V port
(adapter not
supplied)
Range: 15 m distance
(depending on
light intensity)
Levelling range: 4°
Levelling 2,5 mm at 10 m
accuracy: (horiz. & vert.)
Levelling < 2 sec.
speed:
Weight: 908 g (without
packaging)
Particular Safety Instructions
Laser radiation: Do not stare into the laser beam
or view directly with optical instruments. The laser
glasses for RIDGID self-levelling lasers are not
protective safety glasses; they are designed for use
in sunlight and to enhance the visibility of the laser
projection. There are no user-serviceable parts in the
RIDGID self-levelling lasers. For any repairs, contact
your authorised RIDGID service centre. Switch OFF
the power when not in use and before storing the
RIDGID self-levelling laser. If it is not going to be used
for an extended period of time, remove the batteries to
prevent damage from battery leakage.
Never leave the self-levelling laser unattended when
the power is switched on.
Use only high quality alkaline batteries.
Protect the laser from humidity and shocks; use and
transport with care.
After use, always clean the self-levelling laser with a
soft dry clean cloth.
Tools For The Professional
TM
GyroLight
Class II
semi-conduc-
tor laser diode
630-650 nm
< 1 mW
3 AAA batteries
15 m
(depending on
light intensity)
+/- 5°
2 mm at 10 m
5 sec +/- 1 sec
455 g +/- 10g