Blaupunkt SSP701 Bedienungsanleitung Seite 8

SSP701
cooled down. Wipe the body of the iron and the station with a slightly damp cloth, then wipe until they
are dry. The soleplate should be wiped with a soft cloth.
The iron's cleaning mode should be activated periodically, every 1-3 months, depending on the
hardness of the water. The water from the tank will be transferred through the steam ducts of the iron
at elevated temperatures. To do this, place the steam station near a sink. Fill the water tank. Connect
the steam station to a power source. Start the steam station, wait until it heats up (the control lamp will
be on continuously). Place the iron over the sink. Start the iron-cleaning mode by holding down the
service button (1g) for 3 seconds. Hot water with steam will start flowing through the iron. When the
operation is complete, the iron will produce a sound signal and the cleaning icon will go out.
NOTE: the water flowing out of the iron is very hot. Use extreme caution.
6