3
Liebert MPH
DEUTSCH
3.1
Montage direkt am Rahmen
Notwendiges Werkzeug
– Phillips-Schraubendreher Nr. 1, 2
Befestigungssatzinhalt
– Montagew inkel (2 Stk.)
– Schrauben 6-32 x 1/4" (8 Stk.)
Anderes notwendige Montagezubehör
– Federmuttern M5
– Linsenschrauben FormZ M5x10
Dieses Montagematerial gehört nicht zum Lieferumfang der PDU
und muss separat aus dem Katalog bestellt werden – Bestell-Nr.
05.041.335.9
(Inhalt:
Linsenschrauben M5x10).
3.1.1
Montagemöglichkeiten im Schrank H2000
Montieren auf horizontale Profile des Rahmens
1. Mitgelieferte Montagew inkel mittels Schrauben befestigen
2. Federmuttern M5 in die T-Nuten der Profile einstecken und
MPH-Einheit mittels vier Linsenschrauben befestigen
A
B
Rack PDUs Mounting Options
TM
50
Federmuttern
M5
4x
2,8 Nm
Liebert MPH
ENGLISH
Installation directly to the frame
Tools required
– Phillips screwdriver no. 1, 2
Content of the mounting kit
– Mounting brackets (2 pcs)
– Screws 6-32 x 1/4" (8 pcs)
Other necessary mounting hardware
– Spring nuts M5
– Lens head screws formZ M5x10
This mounting hardw are is not included in the package w ith PDU
and must be ordered separately from the catalogue – order no.
breit,
50
05.041.335.9 (content: 50 spring nuts M5 wide, 50 lens head
screws M5x10).
Mounting options in the rack H2000
Installation on the horizontal extrusions of the frame
1. Attach the supplied mounting brackets using screws
2. Insert the spring nuts M5 in the T-slots in the extrusions and
attach the MPH unit using four lens head screws
Index b
(ECR no. 15302)
TM
Seite / Page 19