A 1622 - 3G and Wi-Fi Router
3.3 Connection status
Modem connection status can be observed under Status Network information menu.
3.4 Connection check and further steps
Assure that your PC is accessing to the internet only by A 1622 3G and Wi-Fi Router
(disconnect other communication channels) and try to access
your browser. If success, router is now ready for use with the instrument.
If internet connection over A 1622 3G and Wi-Fi Router is not established:
Verify hardware connections (SIM card, supply, patch cables, antennas,...)
Reset Router and repeat setup procedure.
Check if 3G or Wi-Fi signal is present.
Contact Metrel for assistance.
Instrument should be now set up in the same manner as described in user manual
under section: "Remote instrument connection (over Internet)". Please check this
section in manual and follow described connection procedure.
Remote Communication over Wi-Fi network
20
WiFi interface is used as
gateway to the system
www.google.com
with