Operation; Raising And Lowering The Roller Shutter; Obstacle Detection; Anti-Freeze Protection - SOMFY ilmo 50 WT Gebrauchsanleitung

ilmo 50 WT

5. Operation

5.1 Raising and lowering the roller shutter

1) Press the "Up" button:
The roller shutter rises and stops at the top stop
without requiring adjustment.
2) Press the "Down" button:
The roller shutter descends and stops at the bottom
stop without requiring adjustment.

5.2 Obstacle detection

The automatic obstacle detection function protects the roller
shutter and enables obstacles to be cleared:
- If the roller shutter meets an obstacle when lowered, it
stops automatically:
Press the Up button to release the roller shutter.
- If the roller shutter meets an obstacle when raised, it
stops automatically:
Press the Down button to release the roller shutter.

5.3 Anti-freeze protection

The anti-freeze protection function operates in the same
way as the obstacle detection function:
- If the motor detects any resistance, it does not move in
order to protect the roller shutter:
The roller shutter remains in the initial position.

6. Problems with the ilmo 50 WT?

6.1 Questions and answers

Problems
The roller shutter is turning in
the wrong direction.
The roller shutter is not
operational.
The roller shutter stops too
soon.
24
Possible causes
The wiring is incorrect.
The wiring is incorrect.
The motor is hot.
An incorrect cable has been
used.
The control point is not
compatible.
The roller shutter is encountering
friction when it moves: friction of
the runners, the unit, etc.
The motor has been installed in a
new roller shutter.
Copyright © 2007 - 2008 Somfy SAS. All rights reserved.
1 2
Solutions
Check the wiring and modify it if
necessary.
Check the wiring and modify it if
necessary.
Wait until the motor cools down.
Check the cable and ensure it
has 4 leads
Check for compatibility and
replace the control point if
necessary.
Check the roller shutter installa-
tion and correct any friction.
If the problem continues,
restore the motor to its original
configuration.
Restore the motor to its original
configuration, see the section
entitled "Restoring the original
configuration".