Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Recommended cleaning and disinfecting
agents
Disinfection solution:
"TEGO-DUR", leave to act for 20 – 30 minutes.
Maintenance
Maintenance!
Before
performing
work, isolate the machine from the
compressed air network!
Important!
Maintenance
performed by authorised qualified
personnel.
Regular maintenance and care are indispensable to
prevent frictional and corrosion damage.
Always store the compressed air knife in a dry place.
Checking the maintenance unit
To ensure impeccable operation of the compressed
air knives, please check the maintenance unit at
regular intervals. For this purpose, release the
pressure on the system first of all! Now remove any
condensate water and, if necessary, top up the oiler
with special oil.
This will prevent damage to motor components
caused by dirt or rust particles.
For this purpose
•
remove condensed water and
•
check the operating pressure (max. 8 bars) at
regular intervals.
Repairs
Repairs may only be performed by
qualified
Department is at your disposal for
this purpose.
Use only original spare parts!
Please contact your nearest contractual workshop or
the parent company directly.
The relevant spare parts list can be handed to the
qualified workshops on request.
If performance diminishes, the compressed air knife
must be dismantled and cleaned. Make sure to
change worn components.
Accessories
Operating instructions for pneumatic knife
maintenance
work
may
only
personnel!
Our
Service
See scope of supply on page 1.
Special accessories
Details of special accessories will be found in our
enclosed catalogue.
Warranty
We provide a six months warranty on material and
manufacturing faults, calculating from the date of
delivery.
be
The invoice or delivery notes must be produced as
proof.
Damage caused by normal wear and tear, overload or
inappropriate use is not covered by the warranty.
We can only deal with complaints if the machine is
returned to us in a non-dismantled condition.
GB
16
Werbung
