Starting The Charging Process - Carat electronics One4all Handbuch

Carat electronics
Quick Charger Lithium One4all
Insert one or two batteries of type AA or AAA
into the charging cradle. You have the option of
inserting one or two batteries of the same type
(AA/AAA).
Never attempt to charge batteries of type AA
and AAA at the same time. The lower-performing
battery might be damaged in the process.

Starting the Charging Process

Connect the AC adapter to the battery charger
first, and then to an easily accessible power outlet
(110~240 Volt). The charging process starts au-
tomatically and is confirmed by the green-flashing
LED »CHARGE«.
As soon as the charging process is complete, the
LED »CHARGE« lights up in green continuously.
Disconnect the AC adapter from the power grid
and remove the battery pack. In order to achieve
an optimum charge, leave the battery pack in
the charger for about 30 minutes after the LED
displays the continuous green light.