RCF Forum 6000 Benutzerhandbuch Seite 37

A & B INPUT MODE
MIC / LINE INPUT A and B priority setting
[default]
IN A, IN B and the console signal are mixed.
IN A and IN B are interlocked each other (first-come-first-
served basis). IN A / IN B and console signals are mixed.
IN A has higher priority than IN B.
IN A / IN B and console signals are mixed.
IN A and IN B are mixed.
IN A / IN B signal has higher priority than consoles.
IN A and IN B are mixed.
The console signal has higher priority than IN A / IN B.
IN B and console signals are mixed.
IN A has higher priority than IN B / consoles.
VOX / CMD INPUT A
MIC / LINE INPUT A - VOX and command setting
VOX : internal circuit that automatically detects the audio signal presence on an input.
[default]
IN A can be opened by either an external com-
mand (command = activation) or if the signal is automati-
cally detected (VOX).
IN A can be opened by an external command only (com-
mand = activation). VOX function is off.
IN A is opened if there is no external command (com-
mand = mute) and the signal is automatically detected
(VOX).
IN A is opened if there is no external command (com-
mand = mute). VOX function is off.
VOX / CMD INPUT B
MIC / LINE INPUT B - VOX and command setting
This setting is like the pre-
vious of INPUT A ("VOX /
CMD INPUT A"), but regar-
ding the INPUT B.
[default]
VOX / CMD INPUT B
CMD ACT, VOX ACT
VOX / CMD INPUT B
CMD MUTE, VOX ACT
A & B INPUT MODE
A mix B mix SYS
A & B INPUT MODE
(A lock B) mx SYS
A & B INPUT MODE
(A prio B) mx SYS
A & B INPUT MODE
(A mx B) prio SYS
A & B INPUT MODE
SYS prio (A mx B)
A & B INPUT MODE
A prio (B mx SYS)
VOX / CMD INPUT A
CMD ACT, VOX ACT
VOX / CMD INPUT A
CMD ACT, VOX OFF
VOX / CMD INPUT A
CMD MUTE, VOX ACT
VOX / CMD INPUT A
CMD MUTE, VOX OFF
VOX / CMD INPUT B
CMD ACT, VOX OFF
VOX / CMD INPUT B
CMD MUTE, VOX OFF
37