Setting The Date And Time - Bosch BSA / SDL 4 Series Originalbetriebsanleitung

10. Appendix
10.1

Setting the date and time

The date and time must be set in the following situations:
R
For print-out.
R
After a power cut.
R
When switching from summer to winter time.
i
The date and time can only be set by way of remote control.
Only makes sense if there is a analog display with LCD.
Step
1. Exit from test routine.
2. Select configuration mode for time
and date.
3. Enter hours and minutes.
Example:
12:35 = 1x1000, 2x100, 3x10, 5x1
4. Confirm entry.
5. Enter month and day and confirm
entry.
6. Enter year and confirm entry.
7. Store all settings.
Robert Bosch GmbH
Remote control
+
See step 3 and 4.
See step 3 and 4.
Appendix | BSA 43xx | 71
Result / Analog display
 Indicator lamp flashes.
Warning lamp OFF.
 Current test routine is displayed
(e.g. ).
P 1
 Warning lamp ON.
 Hours and minutes are displayed
(e.g. ).
1 2 . 1 0
 Time is entered (e.g.
1 2 . 3 5
 Month and day are displayed
(e.g. ).
10.03
 Month and day are entered.
 Year is displayed (e.g.
2 0 0 9
 Year is set.
 Return to operating system.
 Warning lamp OFF.
 Current test routine is displayed
(e.g. ).
P 1
"
Date and time are set.
1 691 606 210
en
).
).
|
2015-07-29