Cleaning And Care; Emptying The Fluff Collector; Cleaning The Housing And Cutting Head - Aquapur AFR 3 C2 Bedienungsanleitung

Cleaning and care

Emptying the fluff collector
1) First pull the fluff collector
and lift it off.
2) Empty out the textile fluff.
3) Replace the fluff collector
place.

Cleaning the housing and cutting head

ATTENTION! MATERIAL DAMAGE!
Do not use abrasive, aggressive or chemical cleaning
agents. These could damage the surface of the
appliance!
♦ Clean the housing, the removed spacer
protective cap
♦ Unscrew the shaver foil
Clean the shaver foil
WARNING! RISK OF INJURY!
Be careful when handling the blades under the
shaver foil
be damaged.
♦ Brush fluff and lint remnants from the cutter knives
with the cleaning brush
♦ When all parts are well dried, screw the shaver foil
back on.
♦ Replace the spacer
AFR 3 C2
with a moist cloth.
. These are very sharp and can easily
so that it is seated firmly.
a little way down
so that it is firmly in
from the appliance.
with a slightly damp cloth.
.
GB │ IE
and the
│
23 ■