Description; Technical Data; Items Supplied; Depth Gauge Star Knob Nut - Hilti TE DRS-Y Original Bedienungsanleitung

Symbols
Read the Return waste
operating material for
instructions recycling.
before use.

2 Description

2.1 Use of the product as directed
The TE DRS-Y dust removal module is an accessory for
the Hilti TE 50, TE 60, TE 70 and TE 80 combihammers.
The dust removal module can be attached to the power
tool quickly and easily, i.e. to the combihammer in use.
In order to avoid the risk of injury, use the dust removal
module only in conjunction with the Hilti combihammers
indicated in fig. 4.
The dust removal module is intended for professional
use. The dust removal module may be operated, serviced
and repaired only by authorized, trained personnel. This
personnel must be informed of any particular hazards
that may be encountered.
The dust removal module and the power tool may present
hazards when used incorrectly by untrained personnel or
when used not as directed.
Use the dust removal module only in conjunction with a
vacuum cleaner recommended by Hilti.
Do not use the system to suck up water.
Do not use the dust removal module to pick up explosive
substances or glowing, flammable, burning and aggress-
ive dusts or liquids (e.g. magnesium or aluminum dust,
gasoline, solvents, acids, coolants and lubricants).
In order to avoid electrostatic effects, a vacuum cleaner
equipped with an antistatic hose should be used.
The working environment may be as follows: construction
site, workshop, renovation, conversion or new construc-
tion.

3 Technical data

Right of technical changes reserved.
68‑90/ 290 mm bel-
Module
lows
Weight 660 g
Dimensions (L x W x 310 mm x
H) 96 mm x 290 mm
(12" x 3⁷⁄₈" x 11¹⁄₂")
Location of identification data on the module
The type designation is shown on the appliance. Always
refer to this information when contacting our represent-
ative or service center.
Type:
Generation: 01
Serial no.:
Working on materials hazardous to the health (e.g. as-
bestos) is not permissible.
Tampering with or modification of the module is not
permissible.

2.2 Items supplied

1 Suction unit with side grip
1 68‑90/ 290 mm bellows
1 Suction head, short
1 Suction head, medium
1 Suction head, long
1 Hilti toolbox
1 Operating instructions
1 Adapter
1 Connector
1 Bellows 12-52
1 Depth gauge
1 Star knob
1 Nut
2.3 Optional
1 Suction tube
1 68‑90/550 mm bellows
1 100‑150/ 550 mm bellows
68‑90/ 550 mm bel- 100‑150/ 550 mm
lows bellows
880 g 920 g
575 mm x 96 mm x 575 mm x 100 mm x
290 mm (22⁵⁄₈" x 290 mm (22⁵⁄₈" x
3⁷⁄₈" x 11¹⁄₂") 4" x 11¹⁄₂")
en
Bellows 12‑52
1,000 g
400 mm x ∅ 96 mm
(15³⁄₄" x ∅ 3⁷⁄₈")
9