AGPtek X8 Bedienungsanleitung Seite 5

2. Unscrew the nut and insert it to the ball joint. Insert the ball
joint forcibly into the socket at the back of the wireless charger
and tighten the nut.
3. Install the mount into the car air vent louver or other places.
Connect wireless charger to the corresponding port with Type C
cable or Micro USB cable(Not included). The other end of cable
is connected to car charger with QC 2.0 or above specification.
At this time, LED indicator of wireless charger turns red.
4. Place the phone that can be charged by wireless charger about
10cm away from the wireless charger. The clamp arms will
automatically stretch and you put in phone. The clamp arms will
3