Sms Commands - Johnson Controls Tyco HS2TCHP E Benutzerhandbuch

SMS Commands

Commands
Stay ArmSet
Away ArmSet
Night ArmSet
DisarmUnset
Activate Command Output 1
Activate Command Output 2
Activate Command Output 3
Activate Command Output 4
Deactivate Command Output 1
Deactivate Command Output 2
Deactivate Command Output 3
Deactivate Command Output 4
Bypass 001
Unbypass 001
Status Request
Alarm Memory Request
Help
Notes
Stay armssets the system
Away armssets the system
Night armssets the system
DisarmsUnsets the system
Activates Output 1
Activates Output 2
Activates Output 3
Activates Output 4
Deactivates Output 1
Deactivates Output 2
Deactivates Output 3
Deactivates Output 4
Bypasses specified zone number
Clears the bypass from the specified zone number
Omitting the partition number causes the system to
send a status report for all partitions. To request a
status report for a specific partition enter the appro-
priate partition number.
Omitting the partition number causes the system to
send a status report for all partitions. To request a
status report for a specific partition enter the appro-
priate partition number.
The Help command generates an SMS response list-
ing all Interactive commands that can be sent to
the module. Access Code is not required.