Braun Face 813 Gebrauchsanweisung Seite 10

Description
1 Battery compartment
2 On/off switch
3 Epilation head
4 Protective cap for epilation head
5 Cleansing brush
6 Brush adapter with release
button (6a)
Batteries
Replace the batteries as needed: Open the battery
compartment (1) by turning the lid towards
brush provided. Replace the battery (AA alkaline, 1.5V)
observing correct polarity. Replace the lid by aligning the
dot with (see fig. c) and turning turning towards
it. Make sure your hands and the appliance are dry when
replacing the battery.
Batteries may leak if empty or not used for a long time. In
order to protect you and the appliance, please remove
batteries in a timely manner and avoid skin contact whilst
handling leaking batteries.
Non-rechargeable batteries are not to be recharged. The
terminals must not be short-circuited. Do not mix new and
used batteries or different battery types.
Facial epilation
• Before use, make sure your skin and the epilation head
are thoroughly clean.
• Turn on the appliance by sliding the on/off switch (2) to
the left or to the right. The rotating direction of the
tweezers depends on the direction you move the switch
when turning on. For best results, make sure that the
tweezers rotate against the direction of hair growth.
• To become familiar with the appliance we recommend
trying it first on the chin or near the outer corners of the
mouth.
• Hold the appliance with the tweezers against a section of
skin that you keep stretched with your free hand. Carefully
guide it with gentle pressure against the direction of hair
growth. Do not press too hard as this may lead to skin
injury. To stretch the upper lip area, use your tongue to
push from below.
• After use, slide the on/off switch to the «o» (= off) position.
10
using the
to lock