Getting Started - Klarstein 10027397 Anschluss- Und Anwendungshinweise

• Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
• Using the machine, do not operate the blender without dip into the food. Do not operate the ma-
chine over 20 seconds when the blender is unloaded. Avoid damage the motor from overheat.
• Keep the appliance and its cord out of reach of children less than 8 years.
• If the supply cord is damaged, it must be replaced by qualifi ed persons.
• Always disconnect the blender from the supply if it is left unattended and before assembling, di-
sassembling or cleaning and do not allow children to use the blender without supervision.
Product Description and Accessory
• Rip off all wrapping paper and plastic bags.
• Clean the fi ttings. (Refer to Cleaning Method).
• Special cares need to be paid when preparing food for a baby, an elderly or a patient. Before using
the machine, you should be sure that the accessories have been completely sterilized.
• The switch A button key is for low speed.
• The switch B button key is for Turbo speed.
• Press any switch key, the machine will work. Loosen the switch key, the machine will stop.
• Press down switch A button key, turn on the stepless speed knob to fast or slow the speed.
• If you want the blender move slowly, turn the adjustment for a little.
• If you need the blender move fast, turn the adjustment for more.
• The switch B button key is always in Turbo speed, no matter you turn the stepless speed knob or
not.
7

Getting Started

Switch Key A/B
Stepless Speed Knob