Technical Data; Safety Instructions - Klarstein 10027397 Anschluss- Und Anwendungshinweise

Dear Customer,
Congratulations on purchasing this Klarstein eqipment. Please read this manual carefully and take
care of the followring hints on installation and use to avoid technical damages. Any failure caused by
ignoring the mentioned items and cautions mentioned in the operation and installation instructions
are not covered by our warranty and any liability.

Technical Data 6

Safety Instructions 6

Product Description and Accessory 7
Getting Started 7
Switch Key A/B 7
Stepless Speed Knode 7
Using the Blending 8
Using the Whisk 8
Using the Chopper 8
Using the Extra Blades 9
Cleaning 9
Environment Concerns 9
Declaration of Conformity 9
Item number
Power supply
Power consumtion
Noise level
• Before connecting to the power, please check whether the type of supply and the mains voltage
match with the details given on the rating label on the appliance.
WARNING
Do not touch the blending / chopping blade when connecting to power. Keep your fi ngers,
hair, clothes and other objects a distance from the machine when it is still rotating.
• Pull the plug off when changing fi ttings or after use. Do not mix hot oil or other oily ingredient.
• Avoid children or other people who do not know the operation of this machine to use it, unless they
are under proper instruction. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a person respon-
sible for their safety.
• Do not dip the handle into water or damp the cable, in case you will get an electronic shock.. Children
should be supervised to ensure that they do not play with the appliance.
• Do not put the cable on a hot surface or hang if from the kitchen table. Your children can be hurt
when they are trying to drag the cable and turn down the machine.
• If the supply cord is damaged, it must be replaced by the manufacture of its service agent or a si-
milar qualifi ed person in order to avoid a hazard.
• Do not continuously operate the machine, the motor will overheat. Or turn off the switch every 1
minute, and let the motor cool down at least 1 minute. The motion could not be more than 3 cycles.
More motion should be done after the motor cool down. If not, the motor may damaged.
• Switch off the appliance and disconnect from supply before changing accessories or approaching
parts that move in use.
Contents
Technical Data
10027397
220-240 V ~ 50-60 Hz
800 W
80-85 dB
Safety Instructions
6