Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTIONS
NPS-90A NOTEBOOk POWER ADAPTER 90 W
ITEm NO.: 51 40 07
INTENDED USE
This product is designed to supply electric devices such as notebooks or netbooks
with power. The output voltage of the product is automatically controlled by the
output plug selected. The connected load's current consumption must not exceed
the maximum output rating of the product. Power is supplied via a standard mains
socket (100 – 240 V/AC, 50/60 Hz). The product should only be used in dry indoor
areas. The product features both short-circuit and overload protection.
This product fulfils European and national requirements related to
electromagnetic compatibility (EMC). CE conformity has been verified
and the relevant statements and documents have been deposited at the
manufacturer.
For safety and approval purposes (CE), you must not rebuild and/or modify this
product. If you use the product for purposes other than those described above, the
product may be damaged. In addition, improper use can cause hazards such as
short circuiting, fire, electric shock etc. Read the instructions carefully and keep
them. Make this product available to third parties only together with its operating
instructions.
All company and product names mentioned in this document are registered
trademarks. All rights reserved.
DELIVERy CONTENT
•
Power adapter
•
Power cord
•
10 output plugs
•
Operating instructions
SAFETy INSTRUCTIONS
Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling in this manual, we assume no liability
for any resulting personal injury or damage to property. Such cases
will invalidate the warranty/guarantee.
a)
Persons / Product
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
•
Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
•
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
•
Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
•
Also observe the safety and operating instructions of any other devices
which are connected to the product.
•
Sufficient ventilation is essential when operating the product. Do not
cover the product. Never place the product on a table cloth or on a
carpet. Place it on a hard, flame resistant base.
•
The product should not be used immediately after it has been brought
from an area of cold temperature to an area of warm temperature.
Condensed water might destroy the product. Wait until the product
adapts to the new ambient temperature before use.
•
Make sure that the output of the power adapter is not short-circuited.
•
Never pour liquids over electrical appliances and never leave objects
filled with liquids (e.g. vases) on it or in the vicinity. There is a high risk of
VERSION 03/11
fire or life-threatening electric shock.
•
Always lay the cables so that nobody can trip over or become entangled
in them. This poses a risk of injury.
•
When setting up the product, make sure that the cable is not pinched,
kinked or damaged by sharp edges.
•
The plug must be pulled out of the socket under the following conditions:
-
before cleaning the product
-
during a thunder storm
-
if the product is not being used over a long period.
b)
miscellaneous
•
Consult an expert when in doubt about operation, safety or connection
of the device.
•
Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
If you are not sure about the correct connection or use, or if questions arise which
are not covered by these operating instructions, please do not hesitate to contact
our technical support or another qualified specialist.
Voltcraft®, Lindenweg 15, D-92242 Hirschau, Tel. +49 180/586 582 7.
OPERATION
Disconnect the power adapter from the mains socket before
replacing the output plug.
The power adapter's output voltage must match the input voltage of
the electric consumer.
The output voltage is automatically controlled by the output plug
selected.
1.
Select an output plug that matches the input socket and input voltage of the
electric consumer (see table).
2.
Connect the output plug to the connector at the end of the output cable. Voltage
reversal of the output plug is not possible for security reasons. The inner contact
is positive (+), the outer negative (–).
3.
Connect the output plug to the switched-off consumer.
4.
Connect the power cord's plug with the matching socket of the power adapter.
5.
Connect the mains plug to a standard mains socket (100 – 240 V/AC, 50/60 Hz).
The LED on the top of the power supply unit indicates operational readiness.
6.
Put the power adapter onto a solid, flame-retardant surface and ensure that the
power adapter is sufficiently ventilated.
7.
Now switch the connected consumer on. If it does not function properly, switch it
off immediately and disconnect it from the power adapter.
8.
Remove the power adapter from the mains when it is no longer in use.
CLEANING
•
When cleaning, the power adapter must be disconnected from mains socket and
electrical loads.
•
Only use dry and soft cloth to clear the housing of the power adapter.
•
Do not use abrasive or solvents.
DISPOSAL
Electronic devices are recyclable waste and must not be disposed of in the
household waste!
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
Werbung
Inhaltsverzeichnis
