Herunterladen Inhalt Inhalt Diese Seite drucken

Fehlersuche - Hama Combi III Handbuch

Li-ion videocharger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Technische Daten:
Eingangsspannung: 12 V Gleichspannung
Ladestrom:
800 mA Konstantstrom
Lademethode:
Konstantspannung mit Ladestrombegrenzung
(4,2V für 3,6V Batterie, 8,4V für 7,2V Batterie)

Fehlersuche

Problem
Keine Netzstatus-Anzeige (rote LED)
Keine Ladeanzeige (grüne LED) nach
Einlegen der Batterie
Netz-und Ladeanzeige
des Adapters (LEDs) blinken
Lösung
• Vergewissern Sie sich, das der
AC/DC Netzadapter mit einer passen
den Steckdose verbunden ist.
• Überprüfen Sie das Stromkabel.
• Legen Sie die Batterie erneut ein.
• Die Batterie ist beschädigt
• Trennen Sie den Netzausgang vom
Ladegerät und verbinden ihn erneut
mit dem Ladegerät.
• Die Batterie ist beschädigt.
Instruction manual
This charger can nearly be used for all 3.6V and 7.2V Lithium-Ion camcorder
storage batteries of the following brands: Sony", Panasonic", Canon", Sharp",
JVC", Hitachi", Sanyo", RGA", etc.
• Precision end-of-charge voltage disconnection guarantees full charging of
battery packs.
• "Top-off" charging function after full charge detection.
• Detection of defective battery packs.
• Overcharge protection.
• Additional overcharge protection through built-in safety timer.
Please read this instruction manual before using this charger. It explains how
to operate this product.
Use in dry rooms only!
Contents of your charger:
1 x AC / DC Adapter 230V / 50Hz
1 x Lithium-Ion Video Battery Charger Base
1 x Car Cord Adapter
3 x Adapter Trays
1 x Operating Instructions
Operating instrucions
Connection of the Charger
1. Powering the Charger
Plug the AC / DC Adapter into a power outlet, then connect the other end with
the power input of the charger. The power status indicator will light up in RED.
2. Using the charger in car
Plug the Car Cord Adapter into the 12V cigarette light socket of your car, then
connect the other end with the power input of the charger. The power status
indicator will light up in RED.
ATTENTION: Never plug the Car Cord Adapter into the 24V power of a truck
vehicle. This will cause permanent damage to the charger.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis