Deleting A User Code (Multi-User Mode Only); Maintenance - Conrad Electronic 75 10 74 Bedienungsanleitung

Deleting a user code
(multi-user mode only)
Proceed as follows to delete a user:
• Enter your master code and confirm it with the # key. You are now
in programming mode.
• Enter the user group and the user number to be deleted. The user is
deleted when the # key is pressed.
Example:

Maintenance

Regularly check the technical safety of the code lock and the con-
nected power supply, e.g. for damage to the connection cables and
the case.
If it can be assumed that safe operation is no longer possible then
the code lock or power supply must be taken out of operation and
secured against accidental reactivation. Pull the power plug out of
the socket outlet !
Safe operation must be presumed to be no longer possible if:
70
Delete user number 05 from user group 1.
Delete user number 2 from user group 3.
Delete user number 2 from user group 3.
End of programming