Hama 00034357 Benutzerhandbuch Seite 5

Directional Pad
The D-pad controls the direction in which objects move. This is the primary directional control
in digital mode.
Analog Sticks (L-Stick/R-Stick)
The two analog sticks each control two axeis' (X- and Y-axis). Different games will allow you to
modify the way the analog sticks react. While in Analog Mode, any game that is Vibration
Function Compatible will cause the Advance Controller to vibrate at different levels, depending
on what actions are taking place in the game (e.g. fighting, crashing, or shooting). Not all
games are Vibration Function Compatible. Read the game's instruction manual to find out if it is
Vibration Function Compatible.
Shoulder Action Buttons (L1, L2, R1 and R2)
These are action buttons and their specific functions depend on the game being used.
Action Buttons (Circle, Square, Triangle, X)
These buttons are used to perform various actions, depending on the game. For more details,
see the game's instruction manual.
Start Button
This button is generally used to make selections in the menu and for pausing the game.
For more details, see the game's instruction manual.
Select Button
This is a standard button that allows you to select various items in the menu or game,
depending on the game. It is also used to create delays when programming a Macro.
For more details, see the game's instruction manual.
Analog Button
The Advanced Controller has two different modes, analog and digital mode. The green LED
light will be on when the controller is in analog mode, and off when the controller is in digital
mode.
Connect Button
This button allows you to find a suitable frequency point by pressing the auto scan button. Use
this if you have no connection to the receiver after five minutes. When pressing the auto scan
button on the receiver, the signal led will blink, and will become illuminated to indicate the right
connection between controller and receiver.
Turbo & clear key function
Proceed as described bellow in order to occupy a button with turbo fire:
1. Press the turbo button and then the button which is to be occupied with turbo fire.
2. Press the clear button and then the button which has been occupied with turbo fire in order
to deactivate the turbo function.
8
CAUTION:
- Use this controller only as instructed. Read all instructions before operating controller.
- To prevent fire or shock hazard, do not expose this controller to rain or moisture.
- Do not disassemble. Refer to qualified personnel only.
- This controller should only be operated from the power source indicated on the controller.
If you are not sure of the type of electrical power supplied to your home, contact your local
power company.
- Never push objects of any kind, other than authorized items, into the product as they may
touch dangerous voltage points or short out parts that could result in fire or electrical shock.
- The controller's vibration function can aggravate injuries. Do not use the controller if you
have any injuries or ailments in your hands or arms.
PlayStation 2®, PSone and PlayStation® is registered trademarks of Sony Computer
Entertainment. This product is not sponsored, endorsed or approved by Sony.
See www.hama.com for declaration of conformity with R&TTE Directive 99/5/EC.
9
e