Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The auxiliary input of your device allows you to connect an external source and play its content through its
speakers.
•
Connect your external audio equipment to the AUX INPUT JACK (13)
•
Press FUNCTION to select AUX.
•
To adjust the sound level press VOLUME buttons.
Note: The unit cannot control the player.
•
The operational range between this unit and a BT device is approximately 10 meters.
•
Before you connect a BT device to this unit, familiarize yourself with the BT capabilities of the device.
•
Compatibility with all BT devices is not guaranteed.
•
Any obstacle between this unit and a BT device can reduce the operational range.
•
Keep this unit away from any other electronic device that may cause interference.
•
Press FUNCTION to select the BT mode. The status indicator flashes blue to indicate an attempt cou-
pling is underway.
•
Enable the BT function of your BT audio source device to make it discoverable (see your device's ope-
ration instructions to add or setup a BT device). Select SP-5 on your BT device to make the pairing.
•
Enter default password "0000" if necessary and required by the External BT audio source.
•
Once your BT speaker paired with a BT device, the status indicator lights continuously in blue and two
beeps confirm that the pairing is complete.
•
Navigate through your library in the common way, usinng Play/Pause, Stop and the next/back buttons.
•
Press the PROGRAM key at STOP mode, system will go to PROGRAM mode. -The PRG icon and P01 will
blink.This prompts the user to enter the first songs in the program PLAY list.
•
The user can select the desire tracks by using NEXT/BACK buttons. Once these keys are pressed, the
Display will show the selected track.
•
After select the desired track, press PROGRAM again and it will be stored in the memory.
•
Mp3 maximum 99 and CD maximum 20 tracks can be programmed when repeat steps (2) to (3) pro-
cedures.
•
If press STOP during the program mode, then the selected TRACKS will be stored in the memory and
return to STOP mode (Continuous Play mode)
10
Aux
BT
Programming a Playlist
Werbung
Inhaltsverzeichnis
