Before The First Use; Using The Blender - Klarstein 10009344 Bedienungsanleitung

Check that the accessories are complete and the unit is not damaged. Then pour a little water into the jar
and mix according to the steps below for one or two times, and then pour out. Clean top cover, measuring
cup, jar thoroughly with warm water.
Warning: the blade is sharp, Handle with great care and ensure that unplug the appliance from outlet
before assembling and removing parts.
1. Peeled or cored the fruit or vegetables and then cut it into small dices, put the food piece into
the jar. Usually certain amount of purified water has to be added to facilitate the smooth running
of appliance. The amount of mixture should not exceed the max level as indicated on the jar. The
best proportion of the fruit and water is 2:3.
Note: never use hot liquids or run the appliance empty.
2. Replace the top cover on the jar.
3. You may add ingredient into the jar through the center opening of top cover during operation,
then replace measuring cup if necessary. Let the tabs of measuring cup align with the grooves of
top cover, put down and turn the measuring cup anti-clockwise until the measuring cup in place.
4. Connect the plug to the wall outlet and set speed selector to your desired setting. You can set the
"P" position if want to accelerate the process of blending. The detailed information of speed selector
is as following figure 3.
"OFF"--turns the appliance off.
KNOW YOUR BLENDER

BEFORE THE FIRST USE

USING THE BLENDER

8