Limitations Of Use - On Automation EC2AE Anweisungshandbuch

Index:

1- Limitations of use

2- General description
3- Technical data
4- Description of the panel
5- Type diagram of the electrical system
6- Description of the wires for cabling
7- Wiring of the outputs:
7.1- Power line, flashing light , electric motor 1 (Pedestrian) and electric motor 2
7.2- Output for electric lock and power supply 24VDC
8- Wiring of the inputs
8.1- Sequential control buttons
8.2- Open button
8.3- Photocell while closing
8.4- Opening safety photocell
8.5- Stop button
8.6- Antenna connection
9- Complete electrical connection diagram
10- Description of the buttons on the control panel
11- Description of the LEDs on the control panel
12- Description of the trimmer
13- Description of the dipswitch
14- Programming the stroke
14.1- Double motors
14.2- Single motor
14.3- Programming automatic reclosing
14.4-No attivate the automatic reclosing function
15- Remote controls storage
15.1- Programming the remote control associated with the start input
15.2- Programming the remote control associated with the pedestrian input
16- Cancelling all programmed remote controls
17- Checks and tests
18- Maintenance
19- Troubleshooting
20- User manual
21- Dimensions and fixing of the case
22- Declaration of conformity
LIMITATIONS OF USE: the EC2AE panel was designed to control the operation of 230VAC electro-mechanical or hydraulic
actuators for the automation of single or double leaf gates. Any other use is considered improper and potentially dangerous. It
is forbidden to put the product to any uses other than the intended one. It is forbidden to tamper with or make changes to the
product. On Automation cannot assume responsibility for failure to observe these requirements.
General description
The panel can control geared motors of a power not exceeding 500 W for each motor output, and is also equipped with:
-input diagnostics LED
-integrated receiver programmable with a max of 16 remote controls with fixed or rolling code
-torque adjustment
-independent deceleration for opening and closing
-output for electric lock ( optional )
-input for magnetic induction loops or timers
-pedestrian remote control
ANWEISUNGSHAND - INSTRUCTION MANUAL
1
2
15