Blaupunkt BP38 Bedienungsanleitung Seite 7

Operating Instructions
Fig. 1
• To charge the battery, place the charger (1) in a dry location near a 240V AC electrical socket.
• Plug the transformer (5) into the socket.
• Slide the battery onto the charger ensuring that the grooves on the charger fit into the battery (2) until the battery clicks into
position over the latch (3).
• Plug the output of the transformer (4) into the charger.
• Charging status will be indicated by the lights as shown in the following table.
Battery Tools – Charging Indicator Lights
The following table shows the charging status indicated by the LED lights on the charger.
Green Light (7) Red Light (6)
ON
OFF
ON
Product Speci cations
Power Rating
Power Output
Approximate Charge Time (2Ah Battery)
Approximate Charge Time (4Ah Battery)
Battery Inserted
OFF NO
ON YES
OFF YES
220 ~ 240v, 60Hz
0.38A
3-5hrs
8-10hrs
1
2
3
4
5
6
7
Charging Status
Charger connected to power supply
Battery charging
Battery fully charged
Charger
Battery
Lock/Release Latch
Transformer Power Output
Transformer
Red LED
Green LED