Herunterladen Inhalt Inhalt Diese Seite drucken

Grohe F-DIGITAL DELUXE series Installationsanleitung Seite 88

Mit dampfauslass
Vorschau ausblenden Andere Handbücher für F-DIGITAL DELUXE series:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
USA CDN
Note: Read the installation instructions for the control unit prior
to installation. These contain important information for safe and
professional installation in combination with other modules.
The Ethernet- and the power supply cable are included in
the scope of delivery. Use only these genuine parts.
Safety notes
Danger of electric shock!
Avoid danger due to damaged connection cables.
In the case of damage, the connection cable must
be replaced by the manufacturer or its customer
service department or an equally qualified person.
• To comply with the emissions requirements shielded
management Ethernet cables and couplers must be used!
The coupler is part of the delivery of the control unit 36 397.
• Installation is only possible in frost-free rooms.
®
• The Bluetooth
adapter must not be directly or indirectly
sprayed with water when cleaning.
• The maximum permissible distance between the Bluetooth
adapter and the control unit is 14.8 ft (4,5m).
• Children and adults with physical, mental and/or sensory
impairments must not use the product unsupervised.
• The product must not be used by people under the influence
of alcohol or drugs.
Applications/function
• Interface for controlling light, music and steam.
Compatible with Apple and Android devices with Bluetooth
version 2.1+EDR (limitation by App to be considered). The
required App is available for free in the iTunes Store and the
Google Play store.
Technical data
• Power supply:
• Power consumption:
• Output:
®
• Bluetooth
- version:
® -
• Bluetooth
Transmission distance:
(depending on the environments)
• Supported audio codec:
®
• Supported Bluetooth
Compliance statement (part 15.19)
This device complies with part 15 of the FCC Rules and with
Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Warning (part 15.21)
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Tout changement ou toute modification qui ne serait pas
approuvé expressément par la partie responsable de la
conformité peut annuler l'autorisation d'utilisation de
l'équipement de l'utilisateur.
85
Bluetooth
about 32.8 ft (10m)
- profile:
RF Exposure (OET Bulletin 65)
To comply with FCC RF exposure requirements for mobile
transmitting devices, this transmitter should only be used or
installed at locations where there is at least 7 7/8'' (20cm)
separation distance between the antenna and all persons.
Information to the User (Part 15.105 (b))
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
®
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
Installation of the App
®
Apple:
• Access the App Store directly from the device (requires a
wireless network connection and an Apple account).
• Access the iTunes Store via iTunes (requires iTunes to be
installed on the computer and an Apple account).
• Via QR code
12 V DC
1 W
®
- Class 2
2.1 + EDR
Android:
SBC
• Access the Google Play Store directly from the device
A2DP, SPP
(requires a wireless network connection and a Google
account).
• Via www.play.google.com (requires a Google account).
• Via QR code
Additional instructions for using the app can be downloaded
under www.grohe.com/tpi/f-digital-deluxe.
Installation of the Bluetooth
Fitting and connection, see fold-out pages I and II.
Refer to the dimensional drawing on fold-out page I.
New installation, see fold-out page II.
The installation must be done outside the steam cabin in an
accessible area. The Bluetooth
frequency band of 2.4GHz. The installation near devices with
the same frequency band (eg wireless devices, DECT phones,
etc. (observe manufacturer documentation)) should be
avoided.
®
adapter
®
adapter operates in a

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

F-digital deluxe 36 371

Inhaltsverzeichnis