Grohe F-DIGITAL DELUXE series Installationsanleitung Seite 7

GB
Note: Read the installation instructions for the control unit prior
to installation. These contain important information for safe and
professional installation in combination with other modules.
Safety notes
Danger of electric shock!
Avoid danger due to damaged connection cables.
In the case of damage, the connection cable must
be replaced by the manufacturer or its customer
service department or an equally qualified person.
• Installation is only possible in frost-free rooms.
®
• The Bluetooth adaptor must not be directly or indirectly
sprayed with water when cleaning.
• The maximum permissible distance between the Bluetooth
adaptor and the control unit is 4,5m.
• Children and adults with physical, mental and/or sensory
impairments must not use the product unsupervised.
• The product must not be used by people under the influence
of alcohol or drugs.
Applications/function
• Interface for controlling light, music and steam.
Compatible with Apple and Android devices with Bluetooth
version 2.1+EDR (limitation by App to be considered). The
required App is available for free in the iTunes Store and the
Google Play store.
Technical data
• Power supply:
• Power consumption:
• Output:
®
• Bluetooth - version:
® -
• Bluetooth Transmission distance:
(depending on the environments)
• Supported audio codec:
®
• Supported Bluetooth
Approval and conformity
This product conforms to the requirements of the
relevant EU guidelines.
The conformity declarations can be obtained from the following
address:
GROHE Deutschland Vertriebs GmbH
Zur Porta 9
D-32457 Porta Westfalica
Installation of the App
Apple:
• Access the App Store directly from the device (requires a
wireless network connection and an Apple account).
• Access the iTunes Store via iTunes (requires iTunes to be
installed on the computer and an Apple account).
• Via QR code
Bluetooth
- profile:
Android:
• Access the Google Play Store directly from the device
(requires a wireless network connection and a Google
account).
• Via www.play.google.com (requires a Google account).
• Via QR code
Additional instructions for using the app can be downloaded
under www.grohe.com/tpi/f-digital-deluxe.
®
Installation of the Bluetooth
Fitting and connection, see fold-out pages I, II and III.
Refer to the dimensional drawing on fold-out page I.
New installation, see fold-out page II.
The installation must be done outside the steam cabin in an
accessible area. The Bluetooth
frequency band of 2.4GHz. The installation near devices with
®
the same frequency band (eg wireless devices, DECT phones,
etc. (observe manufacturer documentation)) should be
avoided.
Retrofit (only with control unit 36 397 possible), see fold-
out page III.
1. Turn the entire system free of voltage.
12 V DC
1 W 2. Loosen existing connections to control unit.
®
- Class 2
3. Replace control unit (36 358) to Bluetooth
unit (36 397).
2.1 + EDR
about 10m 4. Reconnect Bluetooth
5. Supply the entire system with voltage.
SBC
External interface
A2DP, SPP
Via the external interface the Bluetooth
rebooted or resetted. It is adapted as a break contact, which
can be used with conventional nc (normally closed) type
switches or push buttons.
1. Turn the entire system free of voltage.
2. Remove Bypass (C), see fold-out page I.
3. Connect switch or push button with cable 47 868 000
(special accessorie) to the external interface (max. 5m).
4. Supply the entire system with voltage.
If the external interface is not used, the bridging contact
must remain plugged in!
®
adaptor
®
adaptor operates in a
®
-enabled control
®
adaptor and the existing modules.
®
adaptor can be
4