Schilling SP100+ Gesamt-Bedienungsanleitung Seite 44

Self-test
Printer will print the printer configuration after
calibration. Self-test printout can be used to check if there is any dot damage
on the heater element, printer configurations and available memory space.
Fig. 29 Self-test printout
gap/black mark sensor
Print head check pattern
Firmware version
Firmware checksum
Printed mileage (meter)
Serial port configuration
Country code
Print speed (inch/sec)
Print darkness
Label size (inch)
Gap distance (inch)
Gap/black mark sensor sensitivity
Total & available memory space
24