Playing A Disc - auna multimedia 10006351 Bedienungsanleitung

Selecting the audio output mode for the internal speakers
• Press SETUP. The on-screen menu opens.
• Press left or righr arrow to highlight the DIGITAL SETUP mode.
• Press down arrow to select the audio output mode. You can select:
* STEREO: The left and right speakers will output different audio from left or right channels espec
tively in-sync;
* MONO L: The left and right speakers will output audio only from left channel in the mean time;
* MONO R: The left and right speakers will output audio only from right channel in the mean time;
* MIX MONO: The left and right speakers will output same audio after mixing left and right
channels in
• Press ENTER to confirm your selection.
• Press left arrow to return to the previous screen, or press SETUP to close the menu.
Selecting the audio output mode for a connected sound system
• Press SETUP. The on-screen menu opens.
• Press left or right arrow to highlight the AUDIO SETUP mode.
• Press down arrow to highlight AUDIO OUT, then press right arrow to accrss the settings.
• Press up or down arrow to select the audio output mode. You can select:
• SPDIF/OFF: if you have not any digital amplifier, use AUDIO OUT jack, and set AUDIO OUT item
to SPDIF/OFF mode.
• Press ENTER to confirm your selection.
• Press left arrow to return to the previous screen, or press SETUP to close the menu.

Playing a disc

• Lift the OPEN tab on the top of your karaoke system to open the disc compartment.
• Place a disc in the tray, then close the compartment cover.
• Make sure that DISC is selected as the audio source.
• Press PLAY/PAUSE to start playback.
23