auna multimedia Kara Liquida BT Bedienungsanleitung Seite 19

BT wireless technology is a short-range radio technology that enables wireless communication be-
tween various types of digital devices, such as mobile phone or computer. It operates within a range of
about 10 meters (30 feet) without the hassle of having to use cables to connect these devices. Since the
BT technology does not require line of sight between the communicating devices, it is not necessary to
line up the transmitting device and the receiver, as in the case of infrared technology.
Communication System and BT Profile of this unit
There are many available BT Profiles describing the basic communication methods, specific functions,
and uses to enable communication between devices.
This unit supports the following: Communication System: BT Specification version 2.1 BT +Enhanced
Data Rate (EDR) Profile: A2DP (Advanced Audio Distribution Profile) A2DP enables audio streaming
from an A2DP equipped BT stereo audio source device (e.g., mobile phone) to this unit. By converting a
wireless stereo audio signal to an analogue audio signal, you can enjoy listening to the sound through
this speaker system. AVRCP (Audio/Video Remote Control Profile) is a technology that allows a single
remote control to control all BT enabled Audio Video equipment to which a user has access.
Notes when using unit with a mobile phone
• This unit cannot be used to talk over the telephone even when there is a BT connection made to a
mobile phone.
• Please, refer to the operating manual supplied with the mobile phone for details on operation of
your mobile phone while transmitting the sound using a BT connection.
Pairing BT devices
BT devices need to be initially paired first before they can exchange data. Once paired, it is not neces-
sary to pair them again unless:
• Pairing is made with more than 8 devices. Pairing can only be made one device at a time. This unit
can be paired to a maximum of 8 devices. If an additional device is paired, the oldest paired device
will be deleted and replaced with the new one.
• This unit is reset. All pairing information is deleted when unit is reset.
• Pairing information is deleted while re-pairing, etc.
Pairing with other BT source devices
1. Press the STAND-BY/ON button to turn the power on.
2. Press the MODE button (remote control) to select BT function. (PAIRING indicator blinks.)
3. Press and hold the STOP/PAIR button for 3 seconds or more. PAIRING indicator blinks quickly. The
unit is now in pairing mode and is ready to be paired with other BT source devices.
4. Perform pairing procedure on the source device to detect this unit. "Kara BT" will appear in the
detected devices list (if available) in the source device. (Refer the source device operating manual
for details).
BT OPERATION
19