Making Coffee - Maestro MR404 Bedienungsanleitung

Making coffee

The process of coffee making consists of passing hot drops of water
and vapor particles through ground coffee. This technology ensures
making tasty and fragrant drink without excessive boiling which
makes the drink too bitter.
It is recommended to use well roasted and freshly ground coffee
and cold water for making coffee.
To make coffee:
- pour the required quantity of ground coffee on the filter without
tramping down. It is enough to put about 6-7 g of coffee for a 100
ml cup.
- place the filter in the teapot case;
Fill the container with water to the necessary level, approximately
100 ml for a cup of drink;
- close the cover of the container;
- switch the machine as described earlier, the machine will start the
operation and the drink will begin collecting in the cups after a little
while.
When the coffee is ready, switch off the machine with the switch.
After the use place the switch in position «0» - OFF and disconnect
the plug from the mains.
This machine can be also used for making tea.
The process of making tea is similar to that of making coffee as
described above except the use of the brew.
Scale removal
When using the device, the so-called «scale», lime deposits
are formed in its inner parts. Regular cleaning improves the
performance of the device.
The quantity and the speed of forming the scale, and consequently,
the necessity of cleaning depend on the water hardness in your
region and the intensity of the device usage.
8
If the Coffee Maker is used 1-2 times a day, depending on the
water quality, it is recommended to clean the instrument at least:
- Soft water – I time every 6 months;
- Medium self-scaling - 1 time / 2-3 months;
- Hard - 1 time / 6-8 weeks.
Regular descaling will only improve the device performance.
To remove the deposits using special means which can be bought
in retail store chain.
Cleaning and maintenance
ATTENTION!
- Never clean the appliance connected to mains.
- Before cleaning, disconnect the appliance and let it cool down.
- Do not use abrasive and aggressive detergents.
- Never submerge the appliance, power line cord and plug in water
or other liquids.
For regular cleaning of the device wash all removable parts with
water (filter) using a soap solution or a mild detergent, rinse it
carefully under running water.
Clean the filter from residues of coffee thoroughly. The purification is
conveniently performed using a small brush.
Clean and dry all parts of the device prior to assembly and use.
Storage
- Switch off the appliance and let it completely cool before storage.
- Wipe and dry the appliance before storage.
- Store the appliance in a cool, dry and clean place beyond the
access of children and people with limited physical and mental
abilities.
EN
9