auna multimedia 10027920 Bedienungsanleitung Seite 19

BIT RATE: DAB allows broadcasters to vary the BIT RATE (or the amount by which an audio signal can be
compressed) depending on the type of broadcast. This enables the amount of stations on a multiplex
to be maximized. Speech and News are often broadcast at a lower Bit Rate; music needs a higher Bit
Rate for good fidelity.
Storing radio stations (DAB)
You can store up to 10 stations as presets.
• Search for a station you want to store and then press and hold PROG / PRE button.
• Display will show „Preset Stored" , turn the TUNE knob to ¬find the preset number (1-10) which you
want to store
• The display will show (Empty) if no station is stored on the particular slot.
• Press SELECT to confi¬rm if you want to store the station in the displayed preset number.
You can listen to tracks from a media device if it is connected to the unit via BT. To connect your device to
the unit via BT follow the steps below:
• While the unit is on, press FUNCTION repeatedly on the unit or FUNC on remote control.
• This unit will automatically activate BT. When sucessfully paired, the [BT] icon will show steadily.
• Search for the system with your BT device and you should see „Auna_Nizza" Enter password
„0000" if required. When connected, the [BT] icon will keep showing steadily.
Note: When the unit has found the last paired BT device, it will connect automatically. For manual Pairing,
press and hold PAIR/SCAN for 3 seconds - now you are able to see the device „Auna_Nizza" on your BT
device. The operating range of the BT for this unit is 10 meters without obstruction. Walls, structures and
other objects can have a negative effect the BT range
Connect your auxiliary device to the 3.5mm AUX IN socket on the back of the unit. An auxiliary device could
be a MP3 player, a CD walkman or a personal computer etc. Press the FUNCTION button to select AUX
mode. Set the auxiliary device to play. You may need to adjust the volume levels on both devices
Bass setting: Press EQ button on main unit or remote control, display shown „L: 00". Turn the TUNE knob
to adjust the Bass level.
Treble setting: Press EQ button on main unit or remote control, display shown „H: 00". Turn the TUNE knob
to adjust the Treble level.
BT
AUX-IN
EQ
19