Hama 00062783 Kurzanleitung Seite 7

You can check whether the wireless LAN card was installed properly under Start => Settings => Control
Panel => System => Device Manager => Network Cards. The entry "108 Mbps High Speed Wireless Network
Adapter" must appear without a yellow exclamation point.
Configuring the wireless LAN and the options of the utility
To start the utility, double click the symbol with the four bars at the bottom right of the screen beside the task
bar.
Options in the "Link Info" menu item:
If your WLAN device is connected to an access point or WLAN router, you can view information on the cur-
rent settings here. Click the "Rescan" button to update the information.
Options in the "Configuration" menu item:
SSID:
Wireless Mode:
Ad hoc Band:
Channel:
Tx Rate (11B/G):
Tx Rate (11A):
Power Mode:
Preamble:
Apply:
Cancel:
Extended Range
Name for the wireless LAN with up to 32 characters. It must be the same for
each device using the network.
Infrastructure if used with an access point or router with wireless LAN
function. Ad-hoc if no access point or router with wireless LAN is used.
Speed standard can be selected in ad hoc mode 11A/11B/11G/11G Turbo
Channel set for your WLAN network. The setting must be the same for the
entire network!
Leave standard setting "Auto"
Leave standard setting "Auto"
Leave "Continuous Access Mode" standard setting
Leave "Short & Long Preamble" standard setting
Apply changes
Cancel changes
We recommend the extended range setting.
In contrast to other IEEE 802. 11g products, extended range stands for an
increased range. Extended range operation establishes wireless data
connections over larger distances or in areas, in which radio signals are
strongly absorbed.