Configuring Graphics - Kaco Powador-display LOCAL Bedienungsanleitung

Section 4 · Powador-LOG

4.5.2.2 Configuring graphics

Enter the following values in the Powador-LOG:
• C ompensation in GBP/kWh
• R ated power of the system in kW
• L anguage
• R ated power for each inverter in kW
Input: Decimals, e. g. 0.4301
Select the desired graphics. In the standard setting, all graphics, with the exception of the
normalised system overview, are activated. This graphic is only useful if the rated power of
the system and the inverters are available.
Press "Save" to confirm the settings and relaunch the application. Press "Cancel" to discard
the changes.
Page 16 16
Powador-display LOCAL_EN