Hifonics EB115A Bedienungsanleitung Seite 13

Functional Overview
The MIC PRORITY switch activates the
1.
karaoke function, i.e. the background
music will be played a bit quieter as soon
as a microphone is used.
The GUITAR VOLUME control adjusts
2.
the volume of a connected guitar.
3. The MIC VOLUME control adjusts the
volume of the connected microphones.
4. The MIC ECHO control adjusts the
degree of echo effect of the connected
microphones.
The MIC DELAY control adjusts the
5.
degree of delay of the echo effect. MIC
ECHO must be turned on.
6. The MIC TREBLE control adjusts the tre-
ble level of the connected microphones.
7. The MIC BASS control adjusts the bass
level of the connected microphones.
The MAIN TREBLE control adjusts the
8.
treble level of the sound system.
9. The MAIN BASS control adjusts the bass
level of the sound system.
10. The MAIN VOLUME control adjusts the
overall volume of the sound system.
11. The device fuse (FUSE) should be
replaced in case of a defect only with an
equivalent fuse with the same ratings.
12. ON DC 12V: The device is powered by
the internal battery.
OFF CHARGE: The device is off and
the internal battery is charging when the
power plug is connected.
ON AC 220V: The device is operated with
220 volts via the connected power supply
plug.
13. An external 12V battery (such as a
vehicle battery) can be connected to
EXTERNAL DC 12V IN to power the de-
vice if the charge capacity of the internal
battery is too low.
14. Insert a USB stick with music files into the
USB port.
15. Use the MODE key to select the input
signal source.
16. Use the >>I key to skip to the next track
(tap it briefly) or adjust the volume of the
currently selected input to the overall
volume (press and hold).
17. Press the key >I to play or pause the
selected track.
18. Use the I<< key to skip to the previous
track (tap it briefly) or adjust the volume
of the currently selected input to the over-
all volume at the bottom (press and hold).
19. Insert a suitable memory card with music
files into the Card Slot.
20. The LCD display shows status informa-
tion
21. You can connect an external signal
source to the LINE IN signal input.
22. At the signal output MIX OUT you can, for
example, connect a mixer.
23. Connect to GUITAR IN to a guitar via a
suitable cable (6.3 mm).
24. Connect to MIC 1 IN a microphone via a
suitable cable (6.3 mm).
25. Connect to MIC 2 IN a microphone via a
suitable cable (6.3 mm).
26. The CHARGE LED indicates that the
internal battery is being charged (charg-
ing time approx. 8-10 hours). Please
always charge and discharge the battery
completely to optimally condition it.
27. The UNDERVOLTAGE LED indicates
that the charge capacity of the internal
battery is too low and should be charged.
28. Connect to AC IN to the enclosed power
plug.
13