Operational Instructions; Front Panel Layout - Vox AC30 BRIAN MAY Bedienungsanleitung

OPERATIONAL INSTRUCTIONS

Congratulations on your purchase of the AC30 BRIAN MAY CUSTOM LIMITED EDITION.

FRONT PANEL LAYOUT

1
Front panel features:
To say this front panel is minimalist is a gross understatement!
1. VOLUME control
2. Standby Switch:
3. Power Switch:
This sets the overall volume of the amp. At low settings the amp is clean
with glass-like note articulation (especially with the Boost engaged), while
at high settings the amp opens up and roars with violin-like sustain. Oh,
and it's very loud too.
Needless to say Brian's favourite setting of this control is MAXIMUM.
This switch allows the amplifier to attain the correct working temperature
before applying the H.T. supply.
Before connecting the amplifier to the Mains supply, ensure the Power and
Standby switches are in the off position.
Turn on the Power switch first and then wait 2–3 minutes before turning on
the Standby switch. Doing this each time you play helps prolong tube life.The
Standby switch is also very useful for playing live as it allows you to keep
the valves at a functional temperature between sets.
This is the ON/OFF switch for the power to the amplifier. Down (towards
the rear of the amp) the mains power is connected to the amp and it's on.
Up (towards the front of the amp) is off.
Please ensure the amplifier is switched off and unplugged before being
moved.
3
2 3