Installation - ABB B21 Installationsanleitung

EN
Immunity conducted
RF Emission
ESD
Standards

Installation

For information about how to mount and install the equipment, follow
the instructions in the Installation Guide at the end of this manual.
E
Warning – Working with high voltage is potentially lethal. Per-
sons subjected to high voltage may suffer cardiac arrest, burn
injuries, or other severe injuries. To avoid such injuries, make
sure to disconnect the power supply before you start the instal-
lation.
Electrical equipment should only be installed, accessed, ser-
viced and maintained by qualified electrical personnel.
E
Warning – For safety reasons it is recommended that the
equipment is installed in a way that makes it impossible to
reach or touch the terminal blocks by accident.
Tech. Data
2kHz - 150kHz
150kHz – 80MHz ( IEC 61000-4-6 )
EN 55022, class B (CISPR22)
15 kV ( IEC 61000-4-2 )
IEC 62052-11, IEC 62053-21 class 1 & 2,
IEX 62053-23 class 2, IEC 62054-21, GB/T
17215.211-2006, GB/T 17215.321-2008
class 1 & 2, GB/T 17215.322-2008 class
0.5 S, GB 4208-2008, EN 50470-1, EN
50470-3 category A, B
7
EN