Select Your Own Logo (Logo) - Seca 465 Bedienungsanleitung Und Garantieerklärung

Select your own logo
(logo)
1. Select the references tab.
The current settings are displayed.
2. Click on the pull-down menu for the reference you
want to change.
All the selection options are displayed.
3. Click on the reference you want to use.
The pull-down menu closes.
4. Repeat steps 2. and 3. for all the references you
want to change.
5. Click on save.
The settings are saved.
You can put your own logo, e.g. that of your institution,
on the printout. We recommend using black-and-white
logos with a resolution of 384 x 288 pixels. Colour or
high-resolution logos are converted on opening and
filed on the SD card.
NOTE
The quality of colour logos is not always
satisfactory once they have been imported. In
this case, use an image processing program to
convert the logo to a black-and-white image
and import it again.
English
Operation • 61